Filter
Top Products
57
Recording
(ENG) VQT5H82
Taking pictures by using the flash
Taking a picture using the flash becomes possible by opening
the built-in flash.
A To open the flash
Turn the camera on, and press the flash open button.
B To close the flash
Push the top part of the built-in flash from directly above.
•
Forcibly closing the flash can damage the camera.
•Make sure to close the built-in flash when it is not in use.
•The flash setting is fixed to [Œ] while the flash is closed.
•Be careful not to catch a finger when closing a flash bulb.
•In the following cases, the flash is fixed to [Œ] (forced flash off).
– When recording motion pictures
– When [Electronic Shutter] is set to [ON]
– When [HDR] is set to [ON]
– When [Silent Mode] is set to [ON]
Set the built-in flash to match the recording.
1 Select the menu. (P28)
2 Press 3/4 to select the item and then press [MENU/SET].
Applicable modes:
Changing Flash Mode
Applicable modes:
> [Rec] > [Flash] > [Flash Mode]
‰ ([Forced Flash On])
([Forced On/Red-Eye])
The flash is activated every time regardless of the recording
conditions.
•Use this when your subject is back-lit or under
fluorescent light.
([Slow Sync.])
([Slow Sync./Red-Eye])
When taking pictures against a dark background landscape,
this feature will slow the shutter speed when the flash is
activated. Dark background landscape will appear brighter.
•Use this when you take pictures of people in front of a
dark background.
•Using a slower speed can cause motion blur. Using a
tripod can enhance your photos.
MENU
DMC-GH4H&GH4_EB-VQT5H82_eng.book 57 ページ ２０１４年３月２４日 月曜日 午後６時１８分