Recording images (basic)
25
Recording images (basic)
Taking Pictures
By only pressing the shutter button, the
exposure (shutter speed and aperture value)
will be automatically adjusted and the picture
will be taken.
[Preparation]
• Insert the card. (P16)
• Set the power switch to [ON]. (P18)
1 Set the mode dial to normal picture
mode [ ].
2
[
A
Optical
finder]
Center the subject in the AF target 1
inside the optical finder and press the
shutter button halfway.
[
B LCD monitor]
After centering the subject in the
AF area 2
on the LCD monitor, press
the shutter button halfway.
• When the focus is adjusted, the focus
indication [¥] 3 appears.
• When the focus indication flashes, the
focus is not adjusted. Press the shutter
button halfway to adjust the focus again.
• The shutter speed and the aperture value
4 are automatically adjusted and
displayed on the LCD monitor.
• When the subject is out of the AF area,
use the AF/AE lock. (P46)
3 Press the shutter button fully to take
the picture.
• After taking a picture, when the auto
review (P72) is set to [1SEC.]/[3SEC.],
the picture is displayed on the LCD
monitor for 1 or 3 seconds.
2,3
1
2
2048
F2.8
1/250
KC52-PP.book 25 ページ 2003年3月13日 木曜日 午後2時29分