Filter
Top Products
Technical use
66
Adding Audio to Recorded Pictures
(Audio Dubbing)
It is possible to add a 10-second narration to
a recorded picture.
[Preparation]
• Set the mode dial to playback [ ]. (P22)
1 Press the [MENU] button.
2 Press 3/4 to select [AUDIO DUB.] and
then press 1
.
3 Press 2/1 to select the picture.
4 Press the 4/[REVIEW/SET]
button, to
start audio recording
.
(1 Microphone)
• When audio has already been recorded,
after the audio dubbing the original audio
is overwritten.
• When audio has already been recorded,
this message is displayed “OVERWRITE
AUDIO DATA?”. Then press 2/1 to
select [YES] and press the
4/[REVIEW/SET] button, to start audio
recording.
5 Press the 4/[REVIEW/SET]
button, to
stop audio recording
.
• Even if you do not press the
4/[REVIEW/SET] button, after about 10
seconds the audio recording stops
automatically.
6 Press the [MENU] button 2 times.
• The menu will disappear.
• Adding audio will use additional memory.
Using this feature will result in fewer images
being able to be saved.
• The audio dubbing cannot be used with
motion images.
• The audio dubbing cannot be used with
protected images.
1,6
2,3,4,5
2048
AUDIO
DUB.
SELECT
START
MENU
EXIT
3,4
2
PROTECT
SLIDE SHOW
SETUP
PLAY
1/2
SELECT SET EXIT
MENU
DPOF PRINT
AUDIO DUB.
RESIZE
KC52-PP.book 66 ページ ２００３年３月１３日 木曜日 午後２時２９分