Filter
Top Products
Preparation
20
VQT0P83
∫ Access to the built-in memory or the
card
When pictures are being recorded onto the
built-in memory (or the card), the access
indication lights red.
A: When the built-in memory is used
B: When the card is used
When the access indication lights, pictures
are being read or deleted, or the built-in
memory (or the card) is formatted, do not:
• turn the camera off.
• remove the batteries or the card (if used).
• shake or impact the camera.
• disconnect the AC adaptor (DMW-AC2;
optional).
(when using the AC adaptor)
The card and the data may be damaged
and the camera may not operate normally.
• The built-in memory (about 14 MB) can
be used as a temporary memory
instead of the card, when the capacity
of the card becomes full.
• The data on the built-in memory or the
card may be damaged or lost due to
electromagnetic wave, static electricity or
breakdown of the camera or the card. We
recommend storing precious data to the
PC or other.
• The access time on the built-in memory
may become longer than the access time
on the card. (Max. about 7 sec.)
• Do not format the built-in memory or the
card with a PC. Please use the camera to
format the built-in memory and the card.
(P81)
2560
5
VQT0P83ENG.book 20 ページ ２００５年３月１日 火曜日 午前１１時２８分