Filter
Top Products
Preparation
24
VQT0P83
BATTERY TYPE
Select the type of battery in use from the
following 2 items.
[ ALKALINE (LR6)/Ni-MH]:
Alkaline batteries or Ni-MH batteries
[ OXYRIDE (ZR6)]:
Oxyride batteries
• If the item on this setting is not selected
according to the type of battery in use, the
battery indication cannot be displayed
correctly.
• The setting on the type of battery also
affects simple mode [ ].
MONITOR
Adjust the brightness of the LCD monitor in
7 steps.
AUTO REVIEW
[OFF]: The recorded picture does not
automatically appear.
[1SEC.]: The recorded picture
automatically appears on the
screen for about 1 second.
[3SEC.]: The recorded picture
automatically appears on the
screen for about 3 seconds.
[ZOOM]: The recorded picture
automatically appears on the
screen for about 1 second. Then
it is enlarged 4 times and appears
for about 1 second. This mode is
useful for confirming focus.
Pictures in burst mode, auto
bracket, pictures with audio
(DMC-LZ2 only) are not enlarged
even if [ZOOM] is selected.
• In motion image mode [ ], auto review
function is not activated.
• When pictures are recorded in simple
mode [ ] (P34), any speed ([ ],
[ ] and [ ]) on burst mode (P46) or
auto bracket [ ] (P44), the auto review
function is activated regardless of the
setting on the auto review function. (The
picture is not enlarged.)
• The auto review function is activated while
pictures with audio are recorded
regardless of the setting on the auto
review function. (The picture is not
enlarged.) (DMC-LZ2 only)
• The setting for the auto review function is
disabled in motion image mode, burst
mode, auto bracket or when [AUDIO
REC.] is set to [ON] (DMC-LZ2 only).
POWER SAVE
(Except for the economy mode)
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
The power save mode is activated
(the camera is automatically turned
off to save the battery life) if the
camera has not been used for the
time selected on the setting.
• Press the shutter button halfway or turn
the camera off and on to cancel the power
save mode.
• When using the AC adaptor (DMW-AC2;
optional)/connecting to a PC or a printer/
recording motion images/playing back
motion images/during Slide Show, the
power save mode is not activated.
• In simple mode [ ] (P34), the setting for
the power save mode is fixed to [2MIN.].
VQT0P83ENG.book 24 ページ ２００５年３月１日 火曜日 午前１１時２８分