Panasonic DMC-SZ7 Camcorder User Manual


 
- 143 -
Others
> Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not
format.
> If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB
connection cable after turning off the power.
> Confirm that the login information (login ID/user name/email address/password) is correct.
> Confirm that the PC is connected to the Internet.
> Confirm that resident software such as virus protection software or firewall is not blocking
access to YouTube or Facebook.
> Confirm with YouTube or Facebook as well.
Pictures cannot be printed using a printer that does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode]. (P46, 122)
> When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can
be printed.
Since aspect ratio of a panorama picture differs from normal pictures, it may not always be
possible to print it correctly.
> Please use a printer that supports panorama pictures. (For details, refer to the operating
instructions for the printer.)
> We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to
adjust the size of the still picture to the print paper size.
> Press [MENU/SET], select the [Setup] menu icon [ ]. Then press [MENU/SET], and then
select the [~] icon to set the desired language. (P48)
In dark places, the AF Assist Lamp lights red to make it easier to focus on a subject.
Is [AF Assist Lamp] on the [Rec] menu set to [ON]? (P84)
The AF Assist Lamp does not turn on in bright places.
The card is not recognized by the PC. (SDXC memory card is used)
There is a problem trying to upload to YouTube or Facebook.
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly.
Others
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.