Panasonic DMCTZ1S Digital Camera User Manual


 
VQT1Z45
86
Advanced (Recording pictures)
Under certain picture-taking conditions including the following cases, the facial recognition
function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [ ].
When the face is not facing the camera
When the face is at an angle
When the face is extremely bright or dark
When there is little contrast on the faces
When the facial features are hidden behind sunglasses, etc.
When the face appears small on the screen
When there is rapid movement
When the subject is other than a human being
When the camera is shaking
When digital zoom is used
Taking picture underwater
About [ƒ]
You can focus on the subject more quickly than in other AF modes.
The picture may stop moving for a moment before being brought into focus when you press the
shutter button halfway. This is not a malfunction.
Setting up [ ] (AF Tracking)
Note
Dynamic tracking function may fail to lock, lose the subject in AF tracking, or track different
subjects depending on the recording conditions such as the ones below.
When the subject is too small
When the recording location is too dark or bright
When the subject is moving too fast
When the background has the same or similar color to the subject.
When jitter is occurring
When using the zoom
Taking picture underwater
If it fails to lock, AF area will flash in red, and disappear. Press 4 again.
AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [Ø] in [AF MODE] in that case.
[FACE RECOG.] does not work when AF tracking is active.
[QUICK AF] will not operate during AF tracking.
It is not possible to set [ ] in [PANORAMA ASSIST], [STARRY SKY], [FIREWORKS],
[PIN HOLE], [FILM GRAIN], or in the recording motion pictures.
It is not possible to set [ ] in [B/W], [SEPIA], [COOL], or [WARM] in [COLOR MODE].
The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to .
1 Bring the subject to the AF tracking
frame, and press 4 to lock the subject
AF tracking frame will continuously focus on
the subject's movement once the subject is
recognized.
AF tracking is turned off when 4 is pressed
again.
Before locking Locked
2 Take the picture
VQT1Z45~_eng.book 86 ページ 2009年1月28日 水曜日 午後9時30分