Panasonic DMCZS10S Camcorder User Manual


 
30 VQT3G90 VQT3G90 31
Taking motion pictures
Recording Mode:
Recording motion pictures in
Records a motion picture at your preferred settings.
• Aperture and shutter speed are automatically set.
Recording motion pictures in
The camera automatically detects the scene to record motion pictures with optimal settings.
When scene does not
correspond to any on the right.
• In mode, focus and exposure will be set according to the face detected.
will be selected for nightscapes and other dark scenes.
• If the camera does not select your desired Scene Mode, choosing an appropriate
mode manually is recommended.
• The following menu options in the [Motion Picture] menu can be set:
[Rec Mode] • [Rec Quality]
Motion picture recording in other recording modes
For details, refer to the pages relating to the respective recording modes. (However, a
motion picture cannot be recorded in [3D Photo Mode] mode)
Press motion picture button to
start recording
[Rec Mode] (96)/[Rec Quality] (97)
Elapsed recording time Remaining recording
time (approx.)
Immediately release the motion picture
button after pressing it.
You can also use zoom while recording
motion pictures.
• The zoom speed will be slower than
normal.
• When using zoom while recording motion
pictures, it may take some time to focus.
Still pictures can be taken during motion
picture recording. (99)
Press the motion picture button
again to end recording
Enables motion pictures to be recorded with (stereo) audio.
An AVCHD motion picture can be recorded continuously for up to 29 minutes 59
seconds when [GFS] or [FSH] is set.
If [Rec Quality] is set to [GFS] or [FSH], and if the surrounding temperature
is high, or motion picture is recorded continuously, is displayed, and the
recording may be stopped halfway through.
If data is repeatedly recorded and deleted, the total available recording time on the SD
card may be reduced. To restore the original capacity, use the camera to format the
SD card. Be sure to save all important data to your computer or other media before
formatting, as all data saved to the card will be erased.
The Optical Image Stabilizer functions regardless of the settings before a motion picture
is recorded.
The following functions are not available:
AF tracking, Extended Optical Zoom, flash, [Face Recog.], [Rotate Disp.] for pictures
taken vertically.
For certain memory cards, recording may end while in progress.
The screen can become narrower in motion pictures compared to still pictures. Also, if
the Aspect Ratio is different for still pictures and motion pictures, the angle of view will
change when starting to record a motion picture. The recordable area is displayed by
setting [Rec Area] (44) to [ON].
If Extended Optical Zoom was used before pressing the motion picture button, these
settings will be cleared, and the recordable area will be larger.
Depending on the environment when recording motion pictures, the screen may
turn black for an instant or noise may be recorded because of static electricity,
electromagnetic waves, etc.
When recording motion pictures using an AC adaptor, if you unplug the AC adaptor or
a power outage occurs, power to the camera is cut, and the motion picture in progress
will not be recorded.