Filter
Top Products
- 119 -
Using with your PC
Connect camera to computer
• Please make sure you use the supplied USB connection cable.
Use of cables other than the supplied USB connection cable may cause
malfunction.
Use cursor button on the camera to select [PC], and press
[MENU/SET]
A message may be displayed on screen if [USB Mode] (→46) is set to
[PictBridge(PTP)]. Select [CANCEL] to close the screen, and set [USB Mode] to
[PC].
Operate with your computer
■
To cancel connection
Click “Safely Remove Hardware” in the Windows System Tray
■
When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if [USB Mode] (→46) is set to
[PictBridge(PTP)].
• Only picture output can be performed.
• It may not be possible to import if there are 1000 or more pictures on the card.
• Motion pictures cannot be read.
Getting Ready:
• Charge the battery
sufficiently.
• When importing pictures from
the built-in memory, remove
any memory cards.
• Turn on the camera and
computer
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
[Access] (sending data)
• Do not disconnect
the USB connection
cable while [Access] is
displayed.
USB connection cable
(always use cable supplied)
Copying still pictures and motion pictures