Filter
Top Products
- 67 -
Dividing a scene to partially delete (iFrame, MP4)
Divide the iFrame or MP4 scene, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥ Set the mode switch to , select the play mode selection icon, and set to [iFrame] or
[MP4]. (l 28)
1 Select the menu.
2 Select the scene you wish to divide using the cursor button and press the
ENTER button.
3 Select to set the dividing point.
≥ It is convenient to use Slow-motion Playback and
Frame-by-frame Playback. (l 57)
≥ Set to at least 2 seconds for the portions to be
deleted and at least 3 seconds for the portion that is
to remain.
4 Select the part for deletion, then press the ENTER button.
5 Select [YES] and press the ENTER button to confirm (play back) the part for
deletion.
≥ A confirmation message appears when [NO] is selected.
Proceed to
Step
7.
6 Stop the playback.
≥ A confirmation message appears.
7 Select [YES] and press the ENTER button.
≥ To continue dividing and deleting other scenes, repeat
Step
s 2-7.
To complete dividing
≥ Press the MENU button.
≥ It may not be possible to divide scenes with a short recording time.
≥ The actual division may slightly slip off the previously designated dividing point.
: [EDIT SCENE] # [SPLIT&DELETE]
0h00m15s0h00m15s0h00m15s