Filter
Top Products
- 67 -
∫ To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
∫ To dub using equipment with a USB terminal
You can dub by connecting a USB cable.
≥ When the USB cable is connected to other equipment, the AC adaptor cannot be used. Please
ensure that the battery is sufficiently charged.
≥ Turn on the unit.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1 Connect the unit to the Blu-ray disc recorder or high-definition (AVCHD)
compatible DVD recorder.
≥ The USB function selection screen will appear on the screen of the unit.
2 Select [RECORDER] using the cursor button on the unit and press the
ENTER button.
≥ When you select an option other than [RECORDER], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button
to turn the LCD monitor on.
Dubbing in high-definition picture quality
About the screen indication of the unit
≥ When the unit is accessing the SD card, card access icon ( ) appears on the unit screen
or the access lamp is on.
≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing
media, as this may result in the loss of recorded content.