![](http://pdfasset.owneriq.net/8/b9/8b905bfc-1818-4d9f-9036-4881c6a10799/8b905bfc-1818-4d9f-9036-4881c6a10799-bg87.png)
- 135 -
Using a smartphone, you can perform record/playback operations from a remote location or upload
motion pictures and still pictures recorded in this unit on SNS (Social Networking Service).
A When connecting to a smartphone
B When connecting to a wireless access point
≥ Refer to [Help] in the “Image App” menu for further details on how to operate.
∫ If the device is Android (NFC-compatible)
≥ Turn on the NFC function of your smartphone.
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a
Wi-Fi connection between this unit and the smartphone.
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or later).
(Except for some models)
1 Start up the smartphone application “Image App”.
2 Touch the smartphone on of this unit.
≥ If this is the first time the smartphone is connecting to this unit, touch
[YES] on the screen of this unit, and then touch the smartphone on
of this unit again.
≥ If the unit is not recognized even when touching the smartphone,
change positions and try again.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
Wi-Fi [HC-V520]/[HC-V520M]
Recording/playing back with Link to
Cell operations
≥ Before using, perform the preparations for using the Wi-Fi function. (l 120)
≥ You need to turn on the Wi-Fi function of your smartphone and install “Image App”.
(l 124)
≥ Do not remove the SD card during remote operation.
Using with a direct connection
Image App
Image App