105
VQT1Z09
Playback
Editing
6
Relay scene combining
[HDC-TM300]
You can combine the relayed scene (l 72) in the built-in memory and the continued scene in the
SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of relay recording
≥ Change the mode to .
1 Insert the SD card that was used
for relay recording.
2 Select the menu. (l 33)
3 When the confirmation message
appears, touch [YES].
≥
Combine the relayed scenes into a SD card.
≥
Scene in the built-in memory will be deleted.
4 Touch [EXIT] when the relay
scene combining complete
message is displayed.
≥ The thumbnail view of the SD card is
indicated.
≥ Relay recording information will be deleted
when the relay scenes are combined, and
relay recording will be possible again.
≥ When the relayed scenes in the built-in
memory or SD card are deleted, combining of
the relayed scenes will not be possible.
To cancel relay information
≥ When the relay information is canceled,
combining of the relayed scenes will not be
possible anymore.
≥ When the confirmation message appears,
touch [YES].
Relay recorded scene Relay scene combining
[COPY] # [RELAY SCENE COMBINE] #
[YES]
[COPY] # [RELAY INFO CANCEL] # [YES]
Combining of the relay scene cannot be
performed if the available space on the SD
card is less than the volume of the relayed
scene in the built-in memory. It is
recommended to combine the relay scene
using a DVD burner or the HD Writer AE 1.0.
HDCSD300&HS300P-VQT1Z09_eng.book 105 ページ 2009年1月21日 水曜日 午前9時53分