Panasonic HDC-SD800P Camcorder User Manual


 
59
VQT3K35
A more impressive image can be obtained by focusing on the object only in close-up
and shading off the background.
The unit can focus on the subject at a distance of approx. 70 cm (28q).
When the Tele macro is set with the zoom magnification less than 12k, it will automatically
be set to 12k.
Tele Macro function is canceled when the zoom magnification becomes lower than 12k.
You can check if the image is level while recording or playing back motion pictures
and still pictures. The function can also be used to estimate the balance of the
composition.
It will switch every time the icon is touched.
# # # Setting canceled
It is possible to set from the quick menu. (l 40)
The guidelines do not appear on the images actually recorded.
Displaying Guidelines at playback
Change the mode to and touch the play mode select icon. Then set [VIDEO/
PICTURE] to [1080/60p], [AVCHD] or [iFrame]. (l 36)
: [VIDEO SETUP] # [GUIDE LINES] # desired setting
To cancel the Guideline function during playback, set to [OFF].
It cannot be set while in Still Picture Playback Mode.
This function allows you to record color images in very low light situations. (Minimum
required illumination: approx. 1 lx)
Recorded scene is seen as if frames were missed.
If set in a bright place, the screen may become washed out for a while.
Bright dots that are usually invisible may be seen, but this is not a malfunction.
Using a tripod is recommended.
In darker areas, Auto Focus may focus a bit slower. This is normal.
Tele macro
Guideline
Color Night Rec
MENU
HDCSD800P-VQT3K35_mst.book 59 ページ 2010年12月20日 月曜日 午前9時4分