- 23 -
∫ To adjust the image in the viewfinder
Adjust to make the image clear by
rotating the eyepiece corrector dial.
≥ Extend the viewfinder and close the LCD monitor
to turn on the viewfinder.
∫ To record showing the contents to a partner
Extend the viewfinder and rotate the LCD monitor
towards the lens side.
≥ LCD monitor and viewfinder are turned on during the face-to-
face recording when the viewfinder is extended.
≥ The image is horizontally flipped as if you see a mirror image.
(However the image recorded is the same as a normal
recording.)
≥ Record by viewing the image in the viewfinder during the face-to-face recording.
≥ Only some indications will appear on the screen. When appears, return the direction
of the LCD monitor to normal position and check the warning/alarm indication. (l 138)
∫ Attaching/Removing the lens hood
This will reduce the extra light entering the lens in bright sunlight or backlight etc., making it
possible to take clearer pictures.
A Attaching the lens hood
B Removing the lens hood
≥ If you use the Filter kit (optional), the conversion lens (optional) or the 3D Conversion Lens
(optional), remove the lens hood.