Filter
Top Products
11
VQT1N58
7 Face detection & AE button [ ] (l 42)
8 PRE-REC button [PRE-REC] (l 35)
9 DC input terminal [DC IN 9.3V] (l 17)
10 Battery holder (l 15)
11 Battery release lever [BATTERY] (l 15)
12 HDMI mini connector [HDMI] (l 77, 79)
13 Disc copy button [DISC COPY] (l 85)
14 Power LCD Extra button
[POWER LCD EXTRA] (l 27)
15 Delete button [ ] (l 68)
16
Audio-video output terminal [A/V]
(l 74, 88)
≥ Use the supplied AV cable only.
17
Component terminal
[COMPONENT] (l 78)
18 USB terminal [ ] (l 82, 89, 99)
19 Menu button [MENU] (l 21)
20 Built-in flash (l 51)
21 Lens (LEICA DICOMAR)
22 Lens hood
Rotate the lens hood counter-clockwise A to
remove it. In order to attach it, place into slot B,
and then rotate it clockwise C.
≥ Attach the MC protector or the ND filter of the
Filter Kit (VW-LF37WE; optional) in front of the
lens hood.
≥ When fitting the tele conversion lens
(VW-T3714H; optional) or the wide conversion
lens (VW-W3707H; optional), first remove the
lens hood.
23 Remote control sensor (l 13)
24 Recording lamp (l 22)
25 Tripod receptacle
This is a hole for attaching the unit to the optional
tripod. (For details on mounting the tripod, refer
to the operating instructions for the tripod.)
A Camera base
Lens cover A
≥The lens cover opens in
recording mode.
(l 20)
20
21
22
23 24
Be careful about the following.
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
zoom lever is pressed toward the W side, the 4
corners of an image will be darkened.
(Vignetting)
(When fitting 2 lens accessories, first remove
the lens hood and then fit them.)
Attaching the lens cap
(Included in the Filter Kit
(VW-LF37WE; optional))
≥ When the filter kit (VW-LF37WE; optional) is
used, protect the lens surface while the unit
is not used with the lens cap supplied with
the filter kit.
≥ To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your
finger and thumb.
25
HDCSD9EP-VQT1N58_eng.book 11 ページ ２００８年１月１０日 木曜日 午後９時３６分