Filter
Top Products
57
VQT1N58
The automatic white balance function may not reproduce natural colours depending on the scenes or
lighting conditions. If so, you can adjust the white balance manually.
≥ Set the AUTO/MANUAL/FOCUS switch to MANUAL. (l 55)
1 Move the cursor button to select
[].
2 Select the white balance mode.
≥ Set the white balance mode to [ ] or the
AUTO/MANUAL/FOCUS switch to AUTO to
restore to the automatic adjustment.
∫ To set the white balance
manually
1 Select [ ], fill the screen with a white
subject.
2 Select [ ].
≥ When the screen turns black instantly and the
[ ] display stops flashing and then lights
constantly, the setting is complete.
≥ If the [ ] display continues flashing, the
white balance cannot be set because it is too
dark etc. In this case, use the automatic white
balance.
≥ When the [ ] display flashes, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set
the white balance for correct adjustment.
≥ When setting both the white balance and the
iris/gain, set the white balance first.
White balance
Icon Mode/Recording conditions
Auto white balance adjustment
Indoor mode (for recording under
incandescent lamps)
Incandescent lights, halogen lamps
Outdoor mode
Outdoors under a clear sky
Manual adjustment mode
≥ Mercury-vapor lamps, sodium
lamps, some fluorescent lights
≥ Lights used for wedding receptions
at hotels, stage spotlights in
theaters
≥ Sunrise, sunset, etc.
AWB
AWB
HDCSD9EP-VQT1N58_eng.book 57 ページ ２００８年１月１０日 木曜日 午後９時３６分