Panasonic HDC-TM90P/PC Camcorder User Manual


 
21
VQT3J56
Charging and recording time
Charging/Recording time
Temperature: 25 oC (77 oF)/humidity: 60%RH
The stated times are when the AC adaptor is used.
These times are approximations.
The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
Recordable time of 3D recording mode is the same.
(During 3D recording mode, 1080/60p and iFrame recording mode cannot be used.)
The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuous
recordable time
Actual
recordable
time
Supplied battery/
VW-VBK180
(optional)
[3.6 V/1790 mAh]
2h25min
[1080/60p] 1 h 30 min 45 min
[HA], [HG],
[HX], [HE]
1h35min
50 min
[iFrame] 1 h 40 min
VW-VBK360
(optional)
[3.6 V/3580 mAh]
4h20min
[1080/60p] 3 h 1 h 35 min
[HA], [HG],
[HX], [HE]
3h15min 1h40min
[iFrame] 3h25min 1h45min
Battery capacity indication
The display changes as the battery capacity reduces.
####
If there is less than 3 minutes remaining, then will become red. If the battery
discharges, then will flash.
The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. The actual time can vary depending on your actual use.
When using the AC adaptor or batteries made by other companies, the remaining
battery capacity will not be shown.
HDC-SD90&TM90-P-VQT3J56_mst.book 21 ページ 2011年1月13日 木曜日 午前9時18分