Filter
Top Products
Operating Instructions
126
Note
• See page 12 for the Single Camera page.
• If you will enable Internet access to the camera, follow the procedures
below.
• When you are using a router that supports UPnP™
1. Enable the Auto Port Forwarding feature on the UPnP™ page (see
page 39).
2. Register with the DynamicDNS service on the DynamicDNS page
(see page 42).
3.
Confirm that the camera can be accessed from the Internet (see page
10).
If you cannot access the camera, see page 9 of the Troubleshooting on
the CD-ROM.
• When you are using a router that does not support UPnP™
Follow the procedures shown on page 41.