Panasonic NV-GS4B Camcorder User Manual


 
28
Index Search Functions
To facilitate searching of desired scene, this Movie Camera automatically
records index signals during recording, as explained in the following.
Photoshot Index Signal
These signals are automatically recorded whenever still pictures are taken in
Photoshot Mode.
(
l
18)
Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode.
Scene Index Signal
Scene Index Signals are automatically recorded when you start recording
after inserting a Cassette.
If [SCENEINDEX] of [RECORDING SETUP] Sub-Menu on the
[CAMERA FUNCTIONS] Main-Menu is set to [2HOUR], an index signal is
recorded when recording is restarted after an elapse of 2 hours or longer. If
it is set to [DAY], an index signal is recorded when recording is restarted
after the date has changed since the last recording. (While the index signal
is recorded, the [INDEX] Indication flashes for a few seconds.
A
)
If the Movie Camera is switched from the VCR Mode to Camera Mode or if
the date and time is set before the start of recording, the index signal is not
recorded.
ª
Photoshot Index Search
1
Set [VCR FUNCTIONS] >> [PLAYBACKFUNCTIONS] >>
[SEARCH] >> [PHOTO].
2
Press the [
9
] Button
1
or [
:
] Button
2
on the Remote
Controller.
With each press of the corresponding button, still pictures recorded in
Photoshot Mode are searched.
Sounds are played back for approximately 4 seconds.
ª
Scene Index Search
1
Set [VCR FUNCTIONS] >> [PLAYBACKFUNCTIONS] >>
[SEARCH] >> [SCENE].
2
Press the [
9
] Button or [
:
] Button on the Remote
Controller.
When the corresponding button is pressed once, the [S 1] Indication
B
appears, and searching of the subsequent scene marked with an index
signal starts. Each time the button is pressed after the start of Scene Index
Search, the indication changes from [S 2] to [S 9], and the beginning of the
scene corresponding to the selected number will be searched.
Up to 9 scene numbers can be selected.
Continuous Index Search
If the [9] Button or the [:] Button is pressed for 2 seconds or longer,
search can be continued at several-second intervals. (To cancel, press the
[1] Button
3
or the [] Button
4
.)
For other notes concerning this item, see page 45.
~~~~~~~~~~~~~~~~~~~~~~~~
Playback Zoom Function
A part of the image can be enlarged up to 10 times during playback.
1
During playback, press the [P.B. ZOOM] Button on the
Remote Controller.
The centre of the image is enlarged to approximately 2 times.
To Change the Zoom Magnification
2
Change the magnification by pressing the [W] Button or [T]
Button on the Remote Controller.
To Change the Enlarging Area of an Image
3
Press the Arrow Button (
π
,
,
,
) on the Remote
Controller that points to the area you want to enlarge.
To Cancel the Playback Zoom Function
Press the [P.B. ZOOM] Button on the Remote Controller.
For other notes concerning this item, see page 45.
PB ZOOM
2t
ZOOM
INDEX INDEX
SELECT
STORE
STOP
KL
OSD
COUNTER
V
/REW
STILL ADV
OFF/ON
P.B.DIGITAL
DATE/
TIME
RESET
TITLE
T
W
sVOL r
¥REC
MULTI/
P-IN-P
PHOTO
SHOT
START/
STOP
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
MENU
ITEM
SET
615
;
ED
VAR.
SEARCH
P.B.
ZOOM
2
1
3
INDEX
S 1
AB
ZOOM
INDEX INDEX
SELECT
STORE
STOP
KL
OSD
COUNTER
V
/REW
STILL ADV
OFF/ON
P.B.DIGITAL
DATE/
TIME
RESET
TITLE
T
W
sVOL r
¥REC
MULTI/
P-IN-P
PHOTO
SHOT
START/
STOP
A.DUB
PLAY
PAU SE
FF/
W
STILL ADV
MENU
ITEM
SET
615
;
ED
VAR.
SEARCH
P.B.
ZOOM
2
M
E
N
U
1