Filter
Top Products
Record mode
25
VQT0T29
Recording on a tape
≥Set to Tape Recording Mode.
≥The lens cover opens automatically.
1 Press the recording start/stop button to
start recording.
2 Press the recording start/stop button again
to pause recording.
≥For the recording time on a tape, refer to
-10-.
≥Carry out a recording check (
-26-) to verify that
the image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search (
-26-).
≥If you want to preserve the original sound
recorded when audio dubbing (
-48-), set
[ADVANCED] >> [AUDIO REC] >> [12bit] to
take pictures.
ª
On-screen display in the tape
recording mode
¢These are only displayed when you press the
[PHOTO SHOT] button half way while a card is
inserted.
These are not displayed when using the remote
control or a free style remote control.
1) Recording time elapse
2) Remaining tape indication
3) Still picture size
4) Card indication (
-54-)
5) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
6) Quality of still pictures
ª
Concerning the remaining tape time
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
≥During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
PC
;
1)
2)
3)¢
5)¢
6)¢
0.2
4)¢
VQT0T29_ENG.book 25 ページ ２００５年１１月２２日 火曜日 午後１１時５分