Filter
Top Products
Before using
8
VQT0T29
Fitting the lens cap
(VW-LF37WE; optional)
Fit the lens cap to protect the surface of the lens.
The lens cap is included in the Filter Kit
(VW-LF37WE; optional).
If you do not use the movie camera when the MC
protector or the ND filter of the Filter Kit
(VW-LF37WE; optional) is attached to the front of
the lens hood, attach the lens cap to protect the
surface of the lens.
1 Push the string through the belt. Push the
lens cap through the loop in the string.
≥To fit or remove the lens cap (VW-LF37WE;
optional), hold both sides of the lens cap with
the tips of your first 2 fingers.
≥The lens cap removed can be hung on the lens
cap fixture. (It cannot be hung if the grip belt is
used as a hand strap.)
The one-touch free-style grip belt
ª To use as a grip belt
Adjust the belt length so it fits your hand.
1 Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
ª
To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this camera more easily.
1 Flip the belt.
1 Flip the belt.
2 Adjust the length.
2 Put your hand through the strap.
≥Use the free style remote control for more
convenience.
≥Hold the movie camera in a way that the
microphones or sensors are not covered with
your hands.
1
3
2
1
2
VQT0T29_ENG.book 8 ページ ２００５年１１月２２日 火曜日 午後１１時５分