Filter
Top Products
Preparation
22
Setting Date/Time (Clock Set)
∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
• When pressing the [MENU] button, the
screen shown in step 2 appears.
• The screen disappears in about
5 seconds. Start from step 1.
1 Select [CLOCK SET] from the
[SETUP] menu. (P24)
2 Set date and time.
• 2/1: Select the desired item.
• 3/4: Set date and time.
3 Select [M/D/Y], [D/M/Y] or [Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
PLEASE SET THE CLOCK
CLOCK SET
MENU
SETUP
2
/
3
LEVEL
3
MENU
VOLUME
NO.RESET
RESET
SHUTTER
CLOCK SET
SELECT
EXIT
MENU
M/D/Y
DEC
11 2004
..
10 00
:
CLOCK SET
EXIT
MENU
SETSELECT
EXIT
10:001
DEC
.11.2004
MENU
M/D/Y
CLOCK SET
SETSELECT
FZ3-PP.book 22 ページ ２００４年６月２１日 月曜日 午後７時６分