Filter
Top Products
20
Transferring Your Images (Windows)
System Requirements:
• IBM PC/AT or compatible.
• MS-Windows 3.1 or Windows 95.
• 386SX CPU or higher. (486 recom-
mended.)
• RAM: 8MB on-board memory.
• 10MB available hard disk space.
• 256 Color monitor or full color recom-
mended (24bit per pixel or 16.7M color).
• 3.5 inch 1.44MB floppy disk drive (for
installation).
• RS-232C serial port (D-Sub 9-pin). An
adaptor is required for a D-Sub 25-pin.
• Mouse or other pointing device.
4
For Windows 95, type in
a:\Setup.exe and click OK.
or
For Windows 3.1, type in
a:\Setup.exe and click OK.
• It is assumed that your 3.5 inch
1.44MB floppy disk drive is assigned
as “A” drive.
If not, replace “A” with the appropriate
letter.
5
Follow the instructions as they appear
on your PC screen.
PV-DC1000 Driver Installation
1
Turn on the PC (Personal Computer)
and start up Windows.
2
Insert the floppy disk into a floppy
disk drive.
3
For Windows 95, select “Run...” from
the Windows 95 Start menu.
or
For Windows 3.1, select “
Run...”
from the ProgramManager File menu.