Filter
Top Products
83
PC Connection
Web Camera
3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
•“Found New Hardware” is displayed.
•“CONNECT WITH PC” and “WEB CAM” are displayed in the EVF and LCD monitor.
A gray box is also displayed. The image within the box can be used with
communication.
• Position the Palmcorder so that you are in the picture.
• To confirm if the connection between the Palmcorder and PC is correct, please refer
to “Audio Tuning Wizard” on page 85.
• When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is displayed.
The following message is displayed. However, testing by the manufacturer
has confirmed functionality of this Palmcorder with Windows XP/2000.
Click [Yes] and proceed.
4 Go to step 5 below.
For Windows 2000 users
3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
•“CONNECT WITH PC” and “WEB CAM” are displayed in the EVF and LCD monitor.
A gray box is also displayed. The image within the box can be used with
communication.
• Position the Palmcorder so that you are in the picture.
• To confirm if the connection between the Palmcorder and PC is correct, please refer
to “Audio Tuning Wizard” on page 85.
• When connecting for the first time using Windows 98SE or Me, the OS installation
CD may be required.
4 Go to step 5 below.
5 Connect the A/V Cable (supplied) to the Audio Adaptor (supplied).
• For PCs with no built-in mic, connecting the A/V Cable (supplied) to the Audio
Adaptor (supplied), the Palmcorder replaces the mic.
• If the speaker and mic are in close proximity, howling may occur.
• Do not disconnect the USB Cable while in use.
This could be a source of trouble. For more details, please read the respective Help
file.
• Close the application, then disconnect the USB Cable.
For Windows 98SE/Me users
Note
Note
DV702.p 81-83.p65 02/03/29, 13:5883