Panasonic PV-L353 Camcorder User Manual


 
30
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
MotionSensor may mistakenly start
when:
background is plain, like a white wall,
or has distinct vertical, horizontal, or
slanted stripes, like a venetian blind.
brightness suddenly changes.
MotionSensor may not start when:
motion is very slow or fast.
moving object is very small.
motion occurs only in 1 corner of
viewing area.
in poor lighting (in this case,
MOTIONSENSOR flashes).
background is plain, like a white wall,
or has distinct horizontal or vertical
stripes.
MotionSensor
Before you begin...
Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
Insert cassette with record tab (page 11).
Set POWER to CAMERA.
Securely position and aim Camcorder.
1 Press MENU for
MENU mode. Press
UP or DOWN to select
DIGITAL EFFECTS .
2 Press M.FOCUS for
DIGITAL EFFECTS
menu.
Press
UP or DOWN to
select
MOTIONSENSOR .
3 Press M.FOCUS to select ON.
4 Press MENU twice for MotionSensor
stand-by mode. (If cassette is not
inserted,
will flash.)
Recording will start about 3 seconds
after motion is detected.
Date and time are recorded if displayed
in EVF or LCD monitor (page 15).
Recording stops about 30 seconds after
motion ceases.
To cancel MotionSensor Mode, set
POWER
to OFF.
Note:
MotionSensor recording starts if Camcorder
is bumped or repositioned.
This feature is not available during normal
recording.
While in MotionSensor stand-by, the
following functions are not available: Record/
Pause, Stand-by mode, Digital E.I.S., Video
Effects (Auto/Digital Fade).
Recording starts automatically if motion
is detected.
1, 2, 3, 4