Filter
Top Products
21
Basic Operation
Playing Back Recordings
Connections
1 Set POWER to:
VCR ➞ view playback.
CAMERA ➞ view picture as it is
recorded.
2 Turn TV ON and set to LINE INPUT.
See TV owner’s manual.
3 Begin playback or recording.
Audio/
Video Out
Connect Camcorder to a TV to view
playback or recordings in progress.
Before you begin...
• Connect Camcorder to power source.
• Make all TV-Camcorder connections.
TV Playback or Viewing
Remove Battery lid and insert AA battery.
• Do not reverse polarity.
• Replace battery when tape loading/unloading takes longer
than usual.
1 Turn cassette Tape Wheel in direction of
arrow to take up any slack.
2 Slide RELEASE to open cassette lid.
3 Insert the cassette with the window up and on
the left, then snap lid shut.
Remove Cassette
Insert Cassette in PlayPak
1 Slide RELEASE and wait for lid to open.
2 Push cassette out through hole in bottom of
PlayPak with your finger.
• Do not obstruct cassette
reel while loading.
• Allow PlayPak Load
Detector to fully retract
before using in VHS VCR.
Load Detector
Load Battery in PlayPak
VCR Playback using PlayPak
1
2
3
12
04.L552H(E)Basic p20-22 03.2.19, 1:06 PM21