Panasonic PV-L652 Camcorder User Manual


 
45
Special Features
Using a SD PCMCIA Adaptor (optional)
If your PC has a PCMCIA type II slot, you can insert the Memory Card into a SD PCMCIA
adaptor (optional, page 51) to transfer images, captured with this Camcorder only, to your
PC.
Before you begin...
Turn your PC on.
Set Camcorder POWER to OFF.
Inserting a Memory Card
1Remove the Memory Card from the
Camcorder (page 34).
2Hold the Memory Card so that the arrow
side faces up and points toward the
SD
PCMCIA Adaptor. Securely insert the
card into the SD PCMCIA Adaptor slot as
far as it will go.
3Hold the SD PCMCIA Adaptor so that
the arrow side points toward the PCMCIA
type II slot of
your PC (Personal
Computer). Securely insert the SD
PCMCIA Adaptor as far as it will go.
Depending on the PC, it may be
necessary to turn the SD PCMCIA
Adaptor upside down in order to insert
the card.
4To remove, push the eject button on your
PC (may vary by machine) and pull the
SD PCMCIA Adaptor out until it is no
longer inserted in the
PC (Personal
Computer).
5Pull the Memory Card out of the SD
PCMCIA Adaptor.
Note:
• Do not remove the SD PCMCIA Adaptor
from the PC while the PC is working or while
image data is being transferred between the
Memory Card and the PC (including
operation such as opening and storing
images), this will cause irreversible damage
to the memory.
• If you change file name or folder in the
memory card, the images will be displayed
properly on PHOTO mode.
• If your PC does not have a PCMCIA type II
slot but has a USB port, you can use the
optional SD USB Reader/Writer (optional,
see page 51).
Please carefully read the Operating
Instructions that come with the SD USB
Reader/Writer before using.
1
3, 4
2, 5