Filter
Top Products
17
Basic Operation
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
Camera Recording
1 Set POWER to CAMERA.
2 Press MENU for
MENU mode.
Press
UP ▲ or
DOWN ▼ to
select
STAND-BY RELEASE .
3 Press DISPLAY to select ON/OFF.
ON : From Stand-by mode, press
RECORD/PAUSE two times
to resume recording.
OFF : From Stand-by mode,
set
POWER to OFF, then to
CAMERA. Press RECORD/
PAUSE to record.
4 Press MENU to exit.
Stand-by Quick Release
If left in RECORD/PAUSE mode for 5
minutes, Camcorder switches to Stand-
by mode to conserve battery. When set
to ON, Stand-by Quick Release lets
you resume recording by pressing
RECORD/PAUSE two times. Stand-By
Quick Release is set to OFF at the
factory.
a Press RECORD/PAUSE to stop
recording.
b Set POWER to OFF and leave
cassette in Camcorder.
c To resume recording, set POWER to
CAMERA.
d Press RECORD/PAUSE to resume
recording.
Note:
• Use Manual Easy Edit (left) if more than
24 hours before recording is resumed.
Manual Easy Editing
For a smooth transition between scenes if
recording is stopped, and then started
within 24 hours.
For proper continuity when taping from Stop
mode or after attaching a new Battery.
a, d,
D
Easy Edit Stand-by
A Set POWER to VCR.
B a Press REWIND/SEARCH to rewind
a few seconds of tape.
B b Press PLAY to review recording.
C c Press STILL where you want to
continue recording.
C Set POWER to CAMERA.
D Press RECORD/PAUSE to resume
recording.
1,
b, c,
A
,
C
B
c
b
a
2, 3, 4