Panasonic SDR-H280 Camcorder User Manual


 
70
LSQT1363
With other products
With other products
With a TV
[HDD] [SD]
The motion pictures and still pictures recorded by
this unit can be played back on a TV.
Use the AC adaptor to free you from worrying
about the battery running down.
1 Connect this unit and a TV.
A AV/S cable (supplied)
Insert the plugs as far as they will go.
Do not use any other AV/S cables except the
supplied one.
If your TV is not equipped with AV Input
Sockets, the 21-pin Adaptor B (purchase
separately) is necessary. Consult your dealer.
* If the TV has an S Video terminal, also connect
the S Video plug to it. This allows you to enjoy
more beautiful pictures.
2 Turn on this unit, then rotate the
mode dial to select or .
3
Press the MENU button, then select
[MEDIA SELECT]
#
[HDD] or [SD
CARD] to select the desired medium
and press the joystick.
4
Change the input channel on the TV.
The channel set will differ depending on the
terminal to which the unit is connected.
5 Start playback on this unit.
The image and audio are output on the TV.
If the image or audio from this unit is not
output on the TV
Check that the plugs are inserted as far as they
go.
Check the connected terminal.
Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
If you have a TV with an SD card slot, the
motion pictures and still pictures recorded on
an SD card may be played back on the TV.
(Refer to the operating instructions of the TV
for details about TV compatibility.)
If the images are not displayed correctly on a
wide-screen TV, adjust the aspect setting on
the TV. (Refer to the operating instructions of
the TV for details.) If the pictures are displayed
squeezed horizontally on a regular TV (4:3),
change the [TV ASPECT] setting on this unit.
(l below)
To watch images with a 16:9
aspect ratio on a regular TV (4:3)
When playing back motion pictures recorded with
a 16:9 aspect ratio ([REC ASPECT] was set to
[16:9]) or still pictures recorded with a 16:9
aspect ratio ([PICTURE SIZE] was set to [ ])
on a TV with a 4:3 aspect ratio, the images may
be squeezed horizontally. In this case, change
the menu setting to play back the pictures in the
original aspect ratio. (Depending on the TV
setting, the pictures may not be displayed
correctly. For more information, please read the
operating instructions of your TV.)
Press the MENU button, then select
[SETUP] # [TV ASPECT] # [4:3]
and press the joystick.
Playback on TV
VIDEO IN
S VIDEO IN
*
AUDIO IN
A
B
2
LSQT1363(EB_ENG).book 70 ページ 2008年2月5日 火曜日 午後5時52分