Filter
Top Products
Others
99
LSQT1363
With a computer
The indication
disappears.
The screen is frozen.
No operation can be
performed.
≥ Is this unit connected to a computer?
# No operation can be performed on this unit when it is connected
to a computer.
≥ Turn off the power to this unit. If the power cannot be turned
off, remove the SD card then press the RESET button, or
remove the battery or AC adaptor and then reattach it. After
that, turn on the power again. If normal operation is still not
restored, detach the power connected, and consult the dealer
who you purchased this unit from.
“PUSH THE RESET
SWITCH.” is displayed.
≥ The unit has automatically detected an error. Remove the SD
card then press the RESET button to restart the unit.
# Press the RESET button with the projecting part of the grip belt
A.
≥ If you do not press the RESET button, the power to this unit is
turned off automatically about 1 minute later.
≥ Even after you press the RESET button, the indication may still
appear repeatedly. If so, this unit needs repair. Detach the
power connected, and consult the dealer who you purchased
this unit from. Do not attempt to repair the appliance by
yourself.
If the SD card is inserted
in this unit, it is not
recognised.
≥ Is the SD card formatted on a computer inserted?
# Use this unit to format SD cards. Please be aware that if an SD
card is formatted, then all the data recorded on the card will be
erased. (l 68)
If the SD card is inserted
in another device, it is not
recognised.
≥ Check that the device is compatible with the capacity or type of
SD card (SD Memory Card/SDHC Memory Card) that you
inserted.
# Refer to the operating instructions of the device for details.
Problem Check points
Even if connected by the
USB cable, this unit is not
recognised by the
computer.
≥ The USB function selection screen does not appear if the USB
cable is connected while the menu screen is displayed.
# Close the menu screen before connecting the USB cable.
≥ Select another USB terminal on the computer.
≥ Check the operating environment. (l 76)
≥ Disconnect the USB cable, turn the unit off then on and then
reconnect the USB cable.
Problem Check points
A
LSQT1363(EB_ENG).book 99 ページ ２００８年２月５日 火曜日 午後５時５２分