Filter
Top Products
19
VQT1D97
Before using
We recommend using the 2-way hand
strap (supplied) to prevent the unit from
dropping.
Attach the 2-way hand strap 1 to
this unit.
∫ To use as a grip belt.
1 Attach the tripod adaptor 2 to
the attachment screw for
tripod adaptor on this unit.
2 Pass your hand between the
strap and the unit and then
pull the length adjustment tab
3.
To use a tripod (optional), the tripod
adaptor on the 2-way hand strap
(supplied) must be attached to this unit.
(Please carefully read the operating
instructions for how to attach the unit to
the tripod.)
1 Attach the 2-way hand strap
and the tripod adaptor to the
unit.
2 Attach camera base 2 on the
tripod to the tripod receptacle
1 on the adaptor.
To detach from the tripod
When detaching from the tripod, only the
unit may detach and the adaptor may not
detach. In this case, use the length
adjustment tab to turn the adaptor and
detach it from the tripod.
≥
When the tripod is used, the card/battery
door cannot be opened. Insert an SD
card and the battery before attaching this
unit to the tripod. (
l
24, 31)
Strap fixture
1
2
3
Attaching to a tripod
1
2
VQT1D97(ENG).book 19 ページ ２００７年３月２０日 火曜日 午後５時３３分