Filter
Top Products
10 VQT2A17 11VQT2A17
Quick guide
2
Open the card/battery
door.
Lift the flap upright and turn it
counter-clockwise until it clicks for
unlocking and then open the door.
3
Insert the battery.
4
Close the card/battery
door.
Close the door and turn the flap
clockwise to the locking position and
then push the flap back flat.
1
Set the mode dial to
[OFF].
5
Connect the AC adaptor
(supplied).
To AC outlet
AC cable
6
Open the terminal cover.
7
Plug the DC plug into the
DC input terminal on the
unit.
1
Set the mode dial to
a position other than
[OFF].
2
Select [YES].
3
Set the date and time.
To select settings To change
numerical values
4
Enter the date and time.
This procedure is for setting the
date and time the very first time. For
the setting procedure for the second
and subsequent times (P.30).
•
Status indicator
Flashing red: Charging in
progress
Off: Charging complete
Charging
Setting the date and time
Press until hearing lever lock.
Lever
Inserting SD cards
(sold separately)
Place label upwards.
Slide straight in until hearing card catch.
Lift the flap upright and turn it
counter-clockwise until it clicks for
unlocking and then open the cover.
Small gap here.
AC adaptor