Filter
Top Products
94 VQT2A17 95VQT2A17
Others
3
Messages
This section explains the main messages appearing on the LCD monitor and
how to deal with them.
Message What to check
CANNOT RECORD. Writing on the SD card failed.
NO DATA.
Neither motion pictures nor still pictures are recorded
on the SD card.
Data is recorded on the SD card, but if this message
appears, the card may be unstable.
Shut power off and turn back on.
THIS CARD
CANNOT RECORD
IN VIDEO MODE.
An 8 MB or 16 MB SD card cannot be used in Video
Recording Mode.
CHECK CARD.
The SD card is not supported or cannot be recognized
by the unit.
CARD LOCKED. The SD card is write-protected. (P.21)
CARD FULL.
The SD card cannot be recorded on because it is full
or the numbers of scenes or numbers of scenes for
the date has reached the maximum. Either delete
unnecessary scenes or insert a new card. (P.60)
SCENE NUMBER IS
FULL.
CANNOT RECORD.
THE NUMBER OF
PROGRAM IS FULL.
Attention for waterproof:
Remove any foreign
objects from inside
the card door
before closing.
Check the card/battery door.
Attention for waterproof:
- max. 6.5ft (2m)
depth, 30 min.
- all covers are
properly locked.
- clean inside
covers.
Check the displayed message before using the unit
underwater.
ERROR
OCCURRED.
RECORDING IS
STOPPED.
Use a Panasonic SD card or other SD card
applicable for motion picture recording. (P.20)
If this message appears when an applicable card is
used, it is recommended to format the card. Formatting
deletes all data on the SD card. Therefore, save data on
a computer or other device before formatting the card.
●
●
Message What to check
EXIT THE MENU
THEN CHANGE TO
MANUAL MODE.
Functions that cannot be used simultaneously were
selected. (P.101)
CANCEL MAGICPIX
MODE.
PLEASE CONNECT
AC ADAPTOR
You tried connecting the unit to a computer without
connecting the AC adaptor.
ERROR
OCCURRED.
PLEASE TURN UNIT
OFF, THEN TURN
ON AGAIN.
The unit detected an error. Eject the SD card and shut
power off and turn back on.
DISCONNECT USB
CABLE.
The unit is not properly connected to a computer or printer.
Disconnect and reconnect the USB cable.
CANNOT OPERATE
WHILE CONNECTED
TO COMPUTER.
Power to the unit cannot be shut off while it is
connected to a computer.
CARD ERROR HAS
OCCURRED.
TO REPAIR THE CARD,
PLEASE CONNECT
AC ADAPTOR OR
CHANGE BATTERY.
The data on the SD card contains errors.
To repair the data, either use a battery with sufficient
life or connect the AC adaptor. Depending on the
error, it may take time to repair the data.
NOW REPAIRING
DATA.
DO NOT REMOVE
CARD.
The data has been repaired.
Depending on the situation, the data may not be
completely repaired.
If power is shut off without repairing data, data can
be repaired the next time that power is turned on.
If repairing fails, the data cannot be played back.
Format the SD card with this unit.
Do not repair SD cards recorded on other devices
on this unit.
●
●
●
●
CANNOT CHECK
CONNECTED
DEVICE.
DISCONNECT THE
USB CABLE FROM
THIS UNIT.
A device that cannot be used with this unit is
connected to the unit.