Filter
Top Products
16
VQT0Q47
≥ The battery is warmed during and after charging. The SD Multi
Camera is also warmed during the operation, however, it is not a
malfunction.
≥ When you do not use this unit, disconnect the DC plug from this unit
and disconnect the AC mains lead from the electrical outlet.
1 Slide the Power Switch to [ON].
• This unit is turned off when you slide the Power Switch to [OFF].
∫ Power/Charge/Card Access Lamp 1
• When the Power/Charge/Card Access Lamp is blinking, do not turn
the power off or do not remove the battery and the card. Otherwise,
the card or its contents may be damaged, or the SD Multi Camera
may not work properly.
• The Power/Charge/Card Access Lamp also blinks when charging the
battery (P14).
Turning This Unit On
Lighting
This unit is turned on. (The Power/Charge/Card
Access Lamp is turned off when this unit is turned
off.)
Blinking
This unit is accessing to the card.
(For recognising/recording/reading/deleting, etc.)
1
Preparation (continued)
VQT0Q47Eng.book 16 ページ ２００４年１１月２６日 金曜日 午前１０時１２分