Filter
Top Products
12
MPEG4 RECORD
PRESS MENU TO EXIT
RECORDING SETUP
OTHER FUNCTIONS
OTHER FUNCTIONS
PRESS MENU TO RETURN
DATE/TIME OFF D/T TIME
DISPLAY OFF ON
LCD SET YES
LCD MONITOR
NORMAL UPSIDE-DOWN
AC MAINS 50HZ 60HZ
CLOCK SET YES
1/100
1/120
4
5
Setting the power supply frequency
Set the power supply frequency before using the SD Multi AV Device.
The power supply frequency is different depending on the country or
region.
Adjustment of the frequency will help reduce the appearance of
horizontal stripes consisting of light and dark patterns under fluorescent
lighting.
1
Set the Operation Mode to [REC>>MPEG4] or [REC>>
PICTURE]
1
. (l 8)
2
Select the [OTHER FUNCTIONS]
2
.
3
Set the [AC MAINS]
3
to [50 HZ] or [60 HZ].
≥This setting may not completely suppress the horizontal stripes.
≥Irrespective of the setting, the horizontal stripes may appear in the
following cases.
-When using the SD Multi AV Device to record pictures under a
lighting instrument such as a high-frequency fluorescent lamp:
-When using the SD Multi AV Device to record a lighting instrument
such as a fluorescent lamp:
ª To reduce the appearance of horizontal stripes
consisting of light and dark patterns
If adjustment of the frequency does not have much effect on reducing
horizontal stripes, operate the SD Multi AV Device as follows.
1
Set the Operation Mode to [REC>>MPEG4] or [REC>>
PICTURE]
1
. (l 8)
2
Move the Jog Lever down for about 1 second.
≥The [1/100] Indication 4 appears when the [AC MAINS] is set to
[50 HZ].
≥The [1/120] Indication 5 appears when the [AC MAINS] is set to
[60 HZ].
To Release this mode
Move the Jog Lever down for about 1 second.
≥Turning the power OFF will release this mode.
≥It is not possible to use Backlight Compensation Mode when this mode
is set to ON.
≥If this mode is used for outdoor recording, the entire image on the
screen (or recording images) may be tinged with white.
≥This mode cannot be set or released while recording.
≥The SD Multi AV Device adjusts the brightness by varying the shutter
speed. However, the shutter speed is fixed in this mode so the
brightness cannot be adjusted in this mode.
VOL
+
-
/
MENU
MODE/
VOL
MPEG4
PICTURE
VOICE
PUSH/SET
SELECT
RECPLAY
1
2
3
2,3
1
1,2,3