Filter
Top Products
Observe the following warnings
when installing.
R Use on a DC 12 V
grounded vehicle.
This system can only be used on a DC 12 V
grounded vehicle. It cannot be used in DC 24 V
and other battery system (large trucks, diesel
vehicles for use in cold regions, etc.). Use on
such vehicles would cause fi re and breakdown.
R Disconnect the battery
terminal during
performing any wiring or installation work.
Wiring or installation work with the battery
terminal connected could cause electric shock
and injury from shorting.
R This system should be installed in a way so
that operation of vehicle protective devices
such as an air bag is not hindered.
Should this system be installed in a vehicle
with a protective device such as an air bag
or an anti-theft system, check with the car
manufacturer about operational cautions
prior to attempting installation and perform
the installation in a safe and proper manner.
Improper removal of the battery may result in
a malfunction of a device or possibly death.
R Never use the security parts of the vehicle
for mounting or grounding the system.
Use of the bolts or nuts of security parts
(steering, brake systems, fuel tank etc.) can
cause brake failure, fi re, or other accidents.
R Check positions of pipes, tanks, electric
wirings in the vehicle when mounting.
Never interfere with or touch pipes, tanks,
or electric wirings when opening holes in
the vehicle body for installation. Apply rust
prevention and waterproofi ng treatments to
the processed area, as rust or water leakage
may result in a fi re, an electric shock, or other
accident.
R Route cords so that they do not get in the
way of occupants driving or getting into or
out of the vehicle.
Route cords so that they do not tangle with the
steering wheel, shift lever, brake pedals, feet
etc., and bundle and fasten them appropriately.
Poorly arranged cords can cause accident and
injury.
R Wire and mount the system as instructed.
Fire or accident could result if wiring and
mounting do not properly follow the operating
instructions.
R Do not attempt to disassemble, repair or
modify the system.
Never attempt to disassemble, repair or modify
the system, or to remove cord insulation to
take power supply from other devices. Fire,
electric shock or accident could result.
R After mounting and wiring the system, check
that all vehicle systems function normally.
If any vehicle equipment (brakes, lights, horn,
hazard and indicator lights etc.) does not work
normally, fi re, electric shock or accident could
result.
R Keep screws and other small components
away from small children.
There is a risk that they could swallow
small components. Seek immediate medical
attention if that happens.
Warning