Others
129
LSQT1145
Recorded still pictures
are not clear.
≥ Are you trying to record small or finely detailed objects with
[PICT.QUALITY] set at [ ]?
# If you try to record small or finely detailed objects with
[PICT.QUALITY] set at [ ], the images may break up into a
mosaic-like pattern. Record with [PICT.QUALITY] set at [ ]
instead. (l 52)
Auto focus function does
not work.
≥ Is manual focus mode selected?
# Set the AUTO/MANUAL/FOCUS switch to AUTO.
≥ Are you trying to record a scene which is hard to bring into
focus in auto focus mode?
# There are some recording subjects and surroundings for which
the auto focus does not operate correctly. (l 137) If so, use the
manual focus mode to adjust the focus. (l 61)
Sound is not played back
from the built-in speaker
of this unit.
≥ Is the volume too low?
# During playback, move the volume lever to display the volume
indication and adjust it. (l 67)
Although this unit is
correctly connected to a
TV, playback images
cannot be seen.
The playback images are
squeezed horizontally.
≥ Have you selected video input on the TV?
# Please read the operating instructions of your TV and select the
channel that matches the input used for the connection.
≥ Is the [TV ASPECT] setting correct?
# Change the setting to match the aspect ratio of the TV.
Press the MENU button, then select [SETUP] # [TV ASPECT]
# [16:9] or [4:3] and press the joystick.
Scenes cannot be deleted
or edited.
≥ Is the DVD-RAM or the DVD-RW (VR format) write-protected?
# Release the protection. (l 82)
If the disc or the contents on the disc have been protected on
another device, release the protection on the same device.
≥ It may not be possible to delete scenes that have been divided.
# Combine the divided scenes, and then delete them. (l 72)
≥ It may not be possible to delete scenes that are displayed as
[ ] on the thumbnail display. If the scenes are unnecessary,
format the disc or card to erase the data. (l 82, 83) Please be
aware that if a disc or card is formatted then all the data
recorded on the disc or card will be erased.
≥ Is the file on the SD card locked?
# Locked files cannot be deleted. Release the lock setting. (l 79)
≥ If the SD card’s write protect switch is set to LOCK, then
deletion is disabled. (l 26)
The images on the SD
card do not look normal.
≥ The data may be destroyed. It may have been destroyed by
static or electromagnetic waves. Store important data on a
computer or other products as well.
Even if a disc or a card is
formatted, it cannot be
used.
≥ Either this unit or the disc or card may be damaged. Please
consult a dealer. Use an SD card from 8 MB to 4 GB with this
unit.
Problem Check points
LSQT1145.book 129 ページ 2006年12月28日 木曜日 午前9時34分