86
VQT2H52
≥ If there is not much remaining capacity in the SD card, a confirmation message asking to copy after
deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.
≥ Refer to page 87 for approximate time for copying.
1 Change the mode to .
≥ Use a sufficiently charged battery or the AC
adaptor.
2 Select the menu. (l 29)
(When copying from built-in memory to SD card)
(When copying from SD card to built-in memory)
≥ When there are relay-recorded scenes in the
built-in memory, a message appears on the
screen. Before copying, store all of the relay
scenes in the SD card. (l 88)
3 Touch the desired item.
[Video&Picture]:
All scenes are copied in order of motion pictures,
then still pictures.
Proceed to step 7.
[VIDEO]:
Motion pictures are copied.
[PICTURE]:
Still pictures are copied.
4 (Only when [VIDEO]/[PICTURE] is selected
in step 3)
Touch the desired item.
[ALL SCENES]:
All motion pictures or still pictures are copied.
Proceed to step 7.
[SELECT SCENES]:
Some motion pictures or still pictures are
selected for copying.
[SELECT DATE]:
Copy by selecting the date.
5 (Only when [SELECT SCENES] is selected
in step 4)
Touch the scene/still picture to
be copied.
≥ When touched, the scene/still picture is
selected and the indication appears on the
thumbnail. Touch the scene/still picture again
to cancel the operation.
≥ Up to 99 scenes/still pictures can be set in
succession.
Copying
[COPY] # [] # [YES]
[COPY] # [] # [YES]
HDCSD10_TM10_TM15P-VQT2H52_eng.book 86 ページ 2009年7月6日 月曜日 午後1時46分