Filter
Top Products
-31-
2. Move the cursor to PRESET and select ON.
The backlight compensation is automatically set.
3. If you want to change the video output level (picture
contrast), move the “I” cursor for LEVEL and adjust
the level.
4. Move the cursor to RET and press
I to return to
the CAM SET UP menu.
2-2. ALC Mode with PRESET OFF
These modes are effective when the main object in the
scene is not located in the centre of the screen and a
source of bright light is located near the centre of the
screen. In these modes, the picture is divided into 48
areas that mask the light to keep the clarity of the pic-
ture.
Note: If ELC is selected, set MASK SET and LEVEL
according to this procedure.
1. Move the cursor to PRESET and select OFF.
The item MASK SET appears on the menu.
1. Select ALC and press
I. The ALC CONT menu
appears.
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON(DNR-H)
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
LENS DRIVE DC
RET
↵↵
↵
↵
** ALC CONT **
BACK LIGHT COMP
PRESET OFF
PEAK MODE OFF
MASK SET
LEVEL ...I.....
- +
RET END
↵
** ALC CONT **
BACK LIGHT COMP
PRESET ON
PEAK MODE OFF
LEVEL ...I.....
- +
RET END
** ALC CONT **
BACK LIGHT COMP
PRESET OFF
PEAK MODE OFF
MASK SET
LEVEL ...I.....
- +
RET END
↵