Panasonic WV-CP504 Security Camera User Manual


  Open as PDF
of 32
 
25
Screenshot 3
The selected setup screen in the setup menu
appears on the screen.
Note:
• Ifthetopscreenofthesetupmenuis
called up with the operation buttons
while a camera image is displayed, the
setup mode is always "DISABLE" to pre-
vent operation errors.
To perform settings in the setup menu,
change the setup mode to "ENABLE".
• The cursor isa reverselyhighlighted
part.
Step 4
Perform the settings for each item.
• Selectionofsettingitem:
Press the up button or down button to
move the cursor.
• Changeofsettings:
Press the right button or left button.
• Displayofadvancedsetupscreen:
Press the setting button when "O" is
attached to the target setting item.
• Returntoprevioussetupscreen:
Move the cursor to "RET" and press the
setting button.
• Returntothe top screen:
Move the cursor to "TOP" and press the
setting button.
Step 5
To return to the camera image screen, move
the cursor to "END" and press the setting but-
ton.
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
BW MODE AUTO1
i-VMD
RET TOP END
 previous next