Filter
Top Products
• Is any part of the camera worn out?
When the camera does not move to the exact position
frequently, the driving parts may be worn out. Contact
the dealer for assistance.
• When the camera position is moved from the preset
position after turning on the power of the camera,
execute the refresh position function from the
[Initialization] tab of the "Maintenance" page. When
"Position refresh" is set for the created schedule, the
camera position will be corrected periodically.
• If the camera always moves to a specific position after
turning on the power of the camera, register that posi-
tion as the home position when convenient. The cam-
era will automatically move to the registered position
using the self return function when turning on the
power of the camera.
• Depending on the traffic of the network or the concen-
tration of access to the camera, there might be diffi-
culties displaying the camera picture. Request the
camera picture using the browser such as by pressing
the [F5] key, etc.
• Depending on the version of your browser, there
might be difficulties refreshing the picture and operat-
ing the camera.
It is recommended to use Internet Explorer
®
6.0 SP2.
When using Windows
®
2000, it is recommended to
use Internet Explorer
®
6.0 SP1.
• When defocusing is caused by the camera position
being moved, carry out the position refresh to correct
the focus.
• This is not malfunction. (This is caused by the shape
of the inner cover WV-Q153 or an inner cover provid-
ed to an optional bracket.)
In this case, images may also be washed out when
"ON" is selected for "AGC".
78
42,
Installation
Guide
The image is not being
refreshed.
The camera does not move
onto the preset position
exactly.
The camera does not auto-
matically move to the previ-
ous position when turning on
the power of the camera.
–
75, 78
38
Installation
Guide
Installation
Guide
Reference
pages
Cause/solution
Symptom
Images are displayed blurry.
When using an optional inner
cover, upper side of images
are hidden (become black)
when the tilt angle of the
camera is almost level.
83
• Is the brightness setting set at an appropriate level?
Click the [RESET] button of "BRIGHTNESS".
No image is displayed (or too
dark).
7