Filter
Top Products
48
Set Sleep Mode
The DPF will stay on until you power it off, however, to save power you
can set it to automatically go into a sleep mode when left idle for a
specific amount of time.
1. On the
HOME screen, press MENU to display the Setup Menu.
2. Select
Set Sleep Mode, and then select the desired setting.
OFF (default) = Power saver is ‘disabled’; DPF will remain on until you power it off
or change the sleep mode setting
2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the
specified amount of time
3. Select Done.
Set Language
Depending on model, this DPF may include multiple languages for the
user interface display.
1. On the
HOME screen, press MENU to display the Setup Menu.
2. Select
Set Language, and then select the desired language.
Reset to Factory Defaults
If you have changed function settings, using this feature will restore all
settings to the factory pre-set defaults.
CAUTION: This will reset all function settings, including the Wi-Fi network
user ID & password, online photo website user ID & passwords,
and schedule settings.
1. On the
HOME screen, press MENU to display the Setup Menu.
2. Select
Reset to Factory Defaults, and then select Yes to reset, or
No to leave current settings.
3. Press
EXIT to return to the HOME screen.