Filter
Top Products
User Interface and Basic Operation
2-4
9783-A2-GB20-00
July 2000
Main Menu
Entry to all of the FrameSaver unit’s tasks begins at the Main Menu, which has
six menus or branches. The Access Level at the top of the screen only appears
when security has been set up.
main Access Level: 1 9783
Device Name: Node A 05/13/2000 02:01
MAIN MENU
Status
Test
Configuration
Auto-Configuration
Control
Easy Install
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions E
xit
Select . . . To . . .
Status View diagnostic tests, interfaces, PVC connections, and
statistics. You can also display LEDs and FrameSaver unit
identity information.
Test Select and cancel tests for the FrameSaver unit’s interfaces.
Configuration Display and edit the configuration options.
Auto-Configuration Configure basic access unit setup automatically based upon a
selected application. You can also automatically populate
network and data port DLCI configuration options with numeric
settings.
Control Control the menu-driven user interface, device naming, login
administration, and selecting software releases. You can also
initiate a power-on reset of the FrameSaver unit.
Easy Install Select Leased Line or Frame Relay mode for minimal
configuration and a quick installation.
See Appendix A,
Menu Hierarchy
, for a pictorial view of the menu hierarchy,
which represents the organization of the FrameSaver unit’s menus and screens.