Filter
Top Products
2 C1628M-F (10/07)
About This Guide
Thank you for purchasing Pelco’s Endura
®
workstation with WS5000 advanced system software. This guide provides basic instructions on how to
connect your Endura workstation, start the WS5000 advanced system software, monitor live video, and work with recorded video.
For detailed instructions on installing, programming, and using your Endura workstation, refer to the installation and operation manuals included
with your unit.
Connecting the Equipment
Refer to Figure 1 as you make the front and back panel connections required to operate this unit:
1. Connect video output (DVI). To connect a VGA monitor to this output, use a DVI-to-VGA adapter plug supplied with the Endura workstation.
2. Connect audio input and output.
3. Connect Cat5e or better network cable to the 1 gigabit RJ-45 network port and to the Endura network.
4. Connect keyboard and mouse to USB ports (front or back panel).
5. Connect power cable to the power connector and a power source.
6. Turn on power.
7. Check indicators.
Figure 1. Connecting the Endura Workstation
CPU ACTIVITY
POWER INDICATOR
03267-39-0020
SN
PRODUCT SERIAL STICKERNUMBER
DVD/CD
DRIVE
NETWORK
ACTIVITY
NETWORK STATUS
UNIT STATUS
POWER BUTTON
CONFIGURATION/
RESET BUTTON
USB 2.0 PORT
AUDIO OUT
POWER CONNECTOR
NETWORK
CONNECTOR (RJ-45)
USB 2.0 PORTS
MICROPHONE IN
DIGITAL VIDEO (DVI)
CONNECTORS
AUDIO IN