Filter
Top Products
Pelco Manual C1988M-B (4/03)
[
11
]
SPECIFICATIONS
GENERAL
CCD Sensor: 1/3-inch interline transfer
Picture Elements: 768 (H) x 494 (V)
Sensing Area: 6 mm diagonally
Synchronization System: INT/AC line lock
Horizontal Resolution: 480 TV lines
Iris Control: Electronic/passive
Minimum Illumination: 0.013 lux at f1.2, 50 IRE
0.008 lux at f1.2, 35 IRE
ESC: 1/60-1/100,000 second
Signal-to-Noise Ratio: 50 dB (AGC off)
Gain Control: Automatic
Vertical Phase: Adjustable 340° range
Backlight Compensation: Selectable by DIP switch setting
Scanning System: 525 lines, 2:1 interlace
Signal Processing: DSP with microprocessor control
Auto Iris Lens Type: DC/video control, selectable by DIP switch setting
Video Output: 1 Vp-p, 75 ohms
1.2 Vp-p for long line transmission
ELECTRICAL
Power Requirements
24 VAC: 18-30 VAC
12 VDC: 10-36 VDC
Power Consumption: 3.3 watts maximum
5.4 VA maximum
Power Connector: 2-pin terminal strip, push-in type
Video Connector: BNC
Lens Jack: 4-pin connector (miniature square with screw lock)
MECHANICAL
Lens Mount C/CS mount (adjustable)
Camera Mount Use 1/4-20 screw, top or bottom of camera housing
ENVIRONMENTAL
Operating Temperature: 14° to 122°F (-10° to 50°C)
Storage Temperature: 14° to 158°F (-10° to 70°C)
PHYSICAL
Dimensions: 2.48 (W) x 2.67 (H) x 4.33 (D) inches (6.3 x 6.8 x 11 cm)
Weight (without lens): 0.77 lb (0.35 kg)
(Design and product specifications subject to change without notice.)