[
2
]
Pelco Manual C1988M-B (4/03)
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should be done only by qualified service and installation personnel.
2. Installation shall be done in accordance with all local and national electrical and mechanical codes
utilizing only approved materials.
3. Use only installation methods and materials capable of supporting four times the maximum specified
load.
4. Use only UL listed class 2 power supply.
5. To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
REGULATORY NOTICES
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However there is no guarantee that the interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try and correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
DESCRIPTION
The CC3751H-2 is a high resolution, color video camera with a 1/3-inch CCD imager. The camera features
a digital slow shutter (DSS) mode, a direct drive/auto iris lens connector, adjustable back focus, backlight
compensation, automatic gain control, and an adjustable C/CS lens mount.
Models
CC3751H-2 High resolution, 480 TV lines, HyperHAD™ CCD, minimum illumination of 0.017 lux at
f1.2 and 50 IRE, NTSC format
IMPORTANT SAFEGUARDS AND WARNINGS