Filter
Top Products
[ 10 ] Pelco Manual C2408M-F (4/03)
Regulatory Notices
FCC Class A (monochrome, EIA cameras only)
NOTE: This equipment has been tested and found to comply with the limits of a Class A digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to cor-
rect the interference at his own expense.
FCC Class B (color, NTSC cameras only)
NOTE: This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However there is no guarantee that the interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to cor-
rect the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
(Design and product specifications subject to change without notice.)
Construction: Aluminum base and cover,
steel camera mounting bracket
Finish: Gray polyester powder coat
Dimensions: 2.71 (diameter) x 7.79 (L) inches
(6.88 x 19.79 cm)
Environment: Low temperature, indoor/
outdoor
Operating
Temperature: -50° to 122°F (-46° to 50°C)
De-ices to -10°F (-23°C)
Weight: 1.45 lb (0.66 kg)
Heater: Turns on at 50°F (10°C) and off
at 80°F (27°C)
SPECIFICATIONS
Electrical
Input Voltage: 12 VDC or 24 VAC, ±10%
Power
Consumption: 13 watts or less
Video
Connector: BNC
General
Pan/Tilt
Adjustment: Manual; 180° pan; 180° tilt
Rating: Meets NEMA Type 3R
standards