Filter
Top Products
16 Pelco Manual C2423M (5/00)
Main Menu
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Camera Menu
Backlight comp Off
Zoom limit x72
Reset camera
<Gain/AGC>
<Auto-iris>
<Next>
Exit
Gain/AGC Menu
AGC mode Auto
Gain 6
Exit
Gain - The amount of amplification the camera places on its video information in order to
obtain a full 1-volt peak-to-peak video signal out.
AGC - Automatic Gain Control.
AGC MODE
There are two AGC settings :
Auto Mode - Automatically adjusts the gain.
Off Mode - In the off mode the AGC is off.
To change the AGC mode:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Gain/AGC.
5. Press the Iris Open button to enter the Gain/AGC menu.
6. Position the cursor (>) beside AGC mode.
7. Press the Iris Open button. The cursor moves to the right, beside the word Auto or Off.
8. Move the joystick up or down to choose between Auto or Off.
9. SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.
GAIN
The gain adjusts the signal level of the video output. Increasing the gain in low light condi-
tions will increase the level of noise in the picture.
To change the gain:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Gain/AGC.
5. Press the Iris Open button to enter the Gain/AGC menu.
6. Position the cursor (>) beside Gain.
7. Press the Iris Open button. The cursor moves to the right, beside the current gain
setting (a numeric value).
8. Move the joystick up or down to change the gain. As you change the gain, the picture
on your monitor gets brighter or darker.
9. SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.
GAIN/AGC