[ 4 ] Pelco Manual C2410M-H (10/05)
DESCRIPTION
The 150 Series Camclosure
®
Integrated Camera System is an in-ceiling dome incorporating a camera
and lens package into a small, discreet, high-security enclosure designed for areas subject to heavy
vandalism.
1 Install Back Box
Mounting Directly to Wall or Ceiling
1. Cut a hole 3.5 inches (9 cm) in
diameter in the ceiling or wall
using the adapter plate as a
template.
2. Connect the video cable.
3. Connect the power wires.
• For 12 VDC, connect the
24 VAC/12 VDC (red) and GND (black)
wires to input power.
• For 24 VAC, connect the 24 VAC/12 VDC (red)
and 24 VAC (blue) wires to input power.
4. Attach the back box to the wall or ceiling.
FCC, Class B (color, NTSC and PAL cameras - except auto iris models)
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However there is no guarantee that the interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve
Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office,
Washington D.C. 20402.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment
can void your authority to operate this equipment under Federal Communications Commission’s rules.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
INSTALLATION